I prezzi possono essere modificati in qualsiasi momento, senza alcun preavviso.
Finale di potenza
DIGAM - D series
The evolution of DIGAM technology for a wide range of 2 channels use
DIGAM D Series offer various power ratings in 6 models ranging from 2 x 400 watts/ch. @ 4 Ohm to 2 x 2000 watts/ch. @ 2 Ohm, still maintaining the 1 unit size. This series, in similar way to the corresponding Q series, is particulary suitable to be used either for stand alone medium/small installations either in large and distributed systems tanks to the capability of advanced remote control and monitoring features suitable to manage up to 100 amps. The D series represents a further flexible and cost effective approach from stand alone use to large systems, allowing in various system configurations to reduce the total number of equipments.
Advanced switch-mode worldwide operating power supply technology for high performance and compact size
Power Factor Correction PFC for extremely low mains consumption and wide mains operating range
Variable speed fan for low noise
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
XLR female / 6.3mm Jack Neutrik style input connectors with link capability
Built-in Clip limiters
Detented gain controls for fast and accurate gain settings
Comprehensive front panel indicators including signal, clip, protect and thermal forecast
Fully protected circuitry design including DC, infrasonic, high frequency, thermal overload and short circuit
Fixed frequency switchmode output stage for high grade sound accuracy
Compact size - all models only 1 RU for reduced rack cost and space
Light weight - all models only 8.5 kg (18 pounds) for easier racking and shipping
Remote Control Option ( RS 485 interface )
DC protection: protects against infrasonic signals
VHF protection: protects the loudspeakers against strong very high frequency non-musical signals above the audible range.
Thermal protection: prevents the amplifier from being overheated. The protection indicators on the front panel are switched on, as a warning, before the protection process is initiated.
AC protection: shuts down the power supply if the line voltage is outside the operating voltage.
Clip limiter: prevents severely clipped waveforms from reaching the loudspeakers, whilst maintaining full peak power.
AC:95 - 265V (50/60Hz)
Power factor cos(fi)
More than 0.95 from 200 W to full power
O°C / + 45° C
Standard rack 19", 1 unit ( H ), 455 mm ( D )
900 VA max (D4002)
Bandwith ( 1 W, 8 ohm )
5Hz – 30KHz
Damping factor ( 8 ohm )
>600 @100Hz , >100 @10 KHz
Slew rate ( 8 ohm )
40V /uS ( input filter bypassed )
S/ N ratio
> 105dB A-Weighted 20Hz-20KHz
THD : Max < 0.5% From 0.1W to full power (tipically < 0.1%)
Max < 0.5% From 0.1W to full power (tipically < 0.1%)
Intermodulation DIM 100
Max < 0.02% From 0.1W to full power (tipically < 0.01%)
Balanced to ground , XLR female combo jack 6.3 mm
10 Kohm each leg, electronically balanced to ground
Su questo sito utilizziamo cookie tecnici, cookie di profilazione, nostri e di terze parti, per proporti pubblicità in linea con le tue preferenze.
Se vuoi saperne di più, clicca qui.
Cliccando in un punto qualsiasi dello schermo o chiudendo questo banner, invece, presti il consenso all'uso di tutti i cookie.